Access denied to an unnamed file

A place for users to ask questions and search for already asked questions. "BE NICE" and helpful!
Post Reply
Paget Francois
Posts: 6
Joined: Mon Jul 22, 2019
Location: Landes
Country: France
Nickname: Fanfan
Laser Machine Make or Type: ARKETYPE Jade L6090
Laser Power: 60W
Laser Bed Size: 600x900mm
Home Position: TR
RDWorks Version: v8.00.26
Windows Version: 8.1 enterprise

Good afternoon from France.
I use RDWorks version 8.00.26 (windows 8.1 enterprise) with the French interface in my computer without printer connexion : I prepare the .rld files before transfering them into a dedicated computer connected to the printer (ARKETYPE Jade L6090).
I regularly receive the following message when I create/modify an object : "L'accès à un fichier non nommé a été refusé" (unnamed file access has been denied). This message (please look at the attached JPG) do not affect the next operations.
I imagine it is a configuration error, but I am unable to find how to suppress these annoying messages...
Any ideas ?
Thanks,
Francois,
You do not have the required permissions to view the files attached to this post.
Top
Pete Cyr
Posts: 1964
Joined: Sun Nov 27, 2016
Location: Suffolk Virginia
Country: United States
Laser Machine Make or Type: Boss 1630
Laser Power: 100w
Laser Bed Size: 16"x30"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.18
Ruida Controller: RDC6442
Windows Version: Win 10
Accessories: roller rotary attachment

If you are trying to open a file created with a newer version of RDWORKs that may be the problem.
RDWORKS files are not backward compatible.

If you created the file then either it is corrupt or something else is wrong...but I am unsure what it may be.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Top
Paget Francois
Posts: 6
Joined: Mon Jul 22, 2019
Location: Landes
Country: France
Nickname: Fanfan
Laser Machine Make or Type: ARKETYPE Jade L6090
Laser Power: 60W
Laser Bed Size: 600x900mm
Home Position: TR
RDWorks Version: v8.00.26
Windows Version: 8.1 enterprise

Pete Cyr wrote: Sat Jul 27, 2019 If you are trying to open a file created with a newer version of RDWORKs that may be the problem.
RDWORKS files are not backward compatible.
No the problem occurs when I create/modify an object either in a new (default) project or in an old (saved and re-opened) project.

Francois,
Top
Guerin Gilles
Posts: 1
Joined: Mon Sep 17, 2018
Location: la grande motte
Country: france
Nickname: tutur34
Laser Machine Make or Type: chinese correllaser machine and robotec ruida
Laser Power: 80 and 180w
Laser Bed Size: 600x400 / 1300x2550
Home Position: TL
RDWorks Version: v8
Windows Version: windows10
Accessories: chiller

Hello Francois

I've just the same problem as you, very recently due to bad manip with corel
Did you find a solution of your problem ? if so what have you done ?

Thanks a lot,
Gilles
Top
Post Reply

Return to “User Questions and Help”