Hi, I am starting to set up a laser cutter with RDWorks software. Thanks for hosting this forum!
Ian
Hello RDWorksLab
-
Ian Tanner
- Posts: 1
- Joined: Tue Apr 19, 2022
- Location: San luis Obispo, CA
- Country: USA
- Laser Machine Make or Type: Freedom
- Laser Power: 100w
- Laser Bed Size: 48x96
- Home Position: BR
- Control Software: RDWORKS
- RDWorks Version: v6.01.18
- Ruida Controller: RDC6442
- Windows Version: 10
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Ian- this sounds like a flatbed laser? You may want to look at Lightburn software if you are not well versed in RDw yet. In any case be sure to save your Vendor/User files as they are often lost in the early days and can be hard to replace. Let us know if you need any help. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased