looking for RDC644XG rescue file
-
David West
- Posts: 2
- Joined: Wed Jun 08, 2022
- Location: Newcastle upon Tyne
- Country: United Kingdom
- Nickname: wezoo
- Laser Machine Make or Type: red black Chinese
- Laser Power: 100w
- Laser Bed Size: 700x500
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: x
- Ruida Controller: RDC6442
- Windows Version: x
many thanks, im at my wits end here!!
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
This is a common problem and we have a file with recovery files, [ viewforum.php?f=100 ] pick one that is similar to your machine and it will at least give you a starting point. All the Ruida controllers I have had contact with use the same files but they are modified for each machine's components and sizes. The files can be looked at and edited with Notepad++ [free] which can be helpful. If you have problems after this please ask and we will try to assist you. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased