hi folks, I'm a newbie, can't seem to access *anything* on this board!
{gaah}
Howdy from Calgary, Alberta, Canada
-
Lizardina
- Posts: 1
- Joined: Fri May 24, 2024
- Location: Calgary, Alberta
- Country: Canada
- Nickname: Liz
- Laser Machine Make or Type: Vevor diode
- Laser Power: 5W
- Laser Bed Size: 400x410mm
- Home Position: BL
- Control Software: LIGHTBURN
- RDWorks Version: none
- LightBurn Version: 1.6.00
- Ruida Controller: Other
- Windows Version: 11
- Accessories: none yet!
-
Gareth Lewis
- Posts: 105
- Joined: Mon Jan 03, 2022
- Location: Aberdare, RCT, Wales
- Country: United Kingdom
- Nickname: Gareth
- Laser Machine Make or Type: Tangerine Tiger
- Laser Power: 50W
- Laser Bed Size: 300 x 500
- Home Position: BL
- Control Software: RDWORKS
- RDWorks Version: v8.01.47
- LightBurn Version: v1.5.03
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Rotary Unit, Camera, digital millammeter, digital thermometer readout
- Contact:
Hi Liz,
I'll check your access.
I'll check your access.
Gareth Lewis
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com-
Gareth Lewis
- Posts: 105
- Joined: Mon Jan 03, 2022
- Location: Aberdare, RCT, Wales
- Country: United Kingdom
- Nickname: Gareth
- Laser Machine Make or Type: Tangerine Tiger
- Laser Power: 50W
- Laser Bed Size: 300 x 500
- Home Position: BL
- Control Software: RDWORKS
- RDWorks Version: v8.01.47
- LightBurn Version: v1.5.03
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Rotary Unit, Camera, digital millammeter, digital thermometer readout
- Contact:
Hi Liz,
I checked using your access settings and I was able to access all areas.
I checked using your access settings and I was able to access all areas.
Gareth Lewis
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts! Need help? Contact me: admin@laseruser.com-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
I think I recall having to do your first post to the introduction board to get access to the whole board?
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased