My Ruidia puts out too much power to the USB and Ethernet cords I have blown three computers so far.
-
Gregslaser
- Posts: 3
- Joined: Tue Jun 25, 2024
- Location: Lakeview
- Country: United States
- Nickname: Greg
- Laser Machine Make or Type: manual co2
- Laser Power: 60
- Laser Bed Size: 20 x 27
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: 8.01.18
- LightBurn Version: V1.5.03
- Ruida Controller: RDC6442
- Windows Version: 10
Anyone with thoughts. I have replaced the low power source and it reads 23.8vdc to the Ruidia. I have also replaced the Ruidi and the high power laser source. Could it be the wiring from the low power source to the Ruidia shorting out or,something like that.
-
Gareth Lewis
- Posts: 105
- Joined: Mon Jan 03, 2022
- Location: Aberdare, RCT, Wales
- Country: United Kingdom
- Nickname: Gareth
- Laser Machine Make or Type: Tangerine Tiger
- Laser Power: 50W
- Laser Bed Size: 300 x 500
- Home Position: BL
- Control Software: RDWORKS
- RDWorks Version: v8.01.47
- LightBurn Version: v1.5.03
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Rotary Unit, Camera, digital millammeter, digital thermometer readout
- Contact:
Hi Gregslaser
I answered one of your other posts. 23.8V is typical for a 24V rail. But your USB should only be around 5V
I answered one of your other posts. 23.8V is typical for a 24V rail. But your USB should only be around 5V
Gareth Lewis
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com