Hi from Vegas
-
aemal
- Posts: 1
- Joined: Sat Oct 05, 2024
- Location: Las Vegas/NV
- Country: United States
- Nickname: aemal
- Laser Machine Make or Type: Custom
- Laser Power: 130
- Laser Bed Size: 20" x 30"
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: 1.7.00
- Ruida Controller: RDC6445
- Windows Version: 11
Currently rebuilding some FSL units with Ruida 6445's. Looking for some help as its not homing correctly.
-
Gareth Lewis
- Posts: 105
- Joined: Mon Jan 03, 2022
- Location: Aberdare, RCT, Wales
- Country: United Kingdom
- Nickname: Gareth
- Laser Machine Make or Type: Tangerine Tiger
- Laser Power: 50W
- Laser Bed Size: 300 x 500
- Home Position: BL
- Control Software: RDWORKS
- RDWorks Version: v8.01.47
- LightBurn Version: v1.5.03
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Rotary Unit, Camera, digital millammeter, digital thermometer readout
- Contact:
Hi Aemal,
Welcome to the Forum.
I would suggest that you take a look at Russ Sadlers video on his K40 Xtreeem Upgrade series where he does the new set up of the Ruida controller.
https://laseruser.com/k40-laser-upgrade ... and-setup/
Hope that helps.
Gareth
Welcome to the Forum.
I would suggest that you take a look at Russ Sadlers video on his K40 Xtreeem Upgrade series where he does the new set up of the Ruida controller.
https://laseruser.com/k40-laser-upgrade ... and-setup/
Hope that helps.
Gareth
Gareth Lewis
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com