Hello, I have 16 years of experience with CO2 lasers.
We bought a new laser cutting machine. And we have problems with the setting. During cutting, uneven cuts appear, There are deviations on the edge of the circle. Setting the backlash does not help. I am looking for tips on what could be the source to eliminate the problem.
New user.
-
Wodzu
- Posts: 1
- Joined: Sun Dec 22, 2024
- Location: Opole/Poland
- Country: Polska
- Nickname: Wodzu
- Laser Machine Make or Type: gweike
- Laser Power: 140
- Laser Bed Size: 512"x984"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01
- LightBurn Version: v1.5
- Ruida Controller: RDC6445
- Windows Version: 10
-
Gareth Lewis
- Posts: 105
- Joined: Mon Jan 03, 2022
- Location: Aberdare, RCT, Wales
- Country: United Kingdom
- Nickname: Gareth
- Laser Machine Make or Type: Tangerine Tiger
- Laser Power: 50W
- Laser Bed Size: 300 x 500
- Home Position: BL
- Control Software: RDWORKS
- RDWorks Version: v8.01.47
- LightBurn Version: v1.5.03
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Rotary Unit, Camera, digital millammeter, digital thermometer readout
- Contact:
Hi Wodzu,
Happy New Year and welcome to the forum.
Can you add some photos of the issues you are having, as this can make things clearer?
Happy New Year and welcome to the forum.
Can you add some photos of the issues you are having, as this can make things clearer?
Gareth Lewis
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com
Forum Owner & Administrator
LaserUser Forum (formerly RDWorksLab)
Join our community of laser engraving enthusiasts!
Need help? Contact me: admin@laseruser.com