Hello to all!
Writing from ITALY.
Owning a 3050 model laser 50W chinese one runds with Ruida V8.01.10 software.
A blown tube caused several surge to system, and system was not working correctly. I thought to solve these by making a reset. and it wa a good mistake to reset all factory settings.
Axes are now working after my modification attempts, but i can not engrave a simple design since X seems working well where Y axis works wrong and makes only a long long lines over lapping.
And i need some help to load again original parameters.
Can you please be so kind and give me permission to access .rdvset files that i have already found at viewtopic.php?p=20480#top at this link?
Thank you
Regards-
HELP PLEASE 50W chinese laser Factory vendor setting files
-
Dervis Burak Parku
- Posts: 4
- Joined: Sun Jul 24, 2022
- Location: italy
- Country: italy
- Laser Machine Make or Type: 3050
- Laser Power: 50
- Laser Bed Size: 500x300 mm
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: 8.01.10
- Ruida Controller: RDC6442
- Windows Version: 10
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
By making your first post now you can access those files. Good luck, Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Dervis Burak Parku
- Posts: 4
- Joined: Sun Jul 24, 2022
- Location: italy
- Country: italy
- Laser Machine Make or Type: 3050
- Laser Power: 50
- Laser Bed Size: 500x300 mm
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: 8.01.10
- Ruida Controller: RDC6442
- Windows Version: 10
Hello I had access to this files.
But problem still keeps going on .
I designed a simple rectangle with 30x10 mm dimensions but machine engraved 20 x 5 mm and not a rectangle but completely scanned full image. Seems like these settings does not fit to my original docs.
Is there any possibility to find real original file here?
I asked to ebay guy who sold me the machine but i dont know if he can help me...
Really mess. And i am really unhappy with this.
Please help me.
But problem still keeps going on .
I designed a simple rectangle with 30x10 mm dimensions but machine engraved 20 x 5 mm and not a rectangle but completely scanned full image. Seems like these settings does not fit to my original docs.
Is there any possibility to find real original file here?
I asked to ebay guy who sold me the machine but i dont know if he can help me...
Really mess. And i am really unhappy with this.
Please help me.
-
Dervis Burak Parku
- Posts: 4
- Joined: Sun Jul 24, 2022
- Location: italy
- Country: italy
- Laser Machine Make or Type: 3050
- Laser Power: 50
- Laser Bed Size: 500x300 mm
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: 8.01.10
- Ruida Controller: RDC6442
- Windows Version: 10
Dear All,
I have received this file in attachment which has not been tested by me yet.
If someone would like to use, you can download and try.
Of course damage is under your own responsability.
This evening I will try and see if it works.
Later will update this message.
Thank you all!
Regards!
I have received this file in attachment which has not been tested by me yet.
If someone would like to use, you can download and try.
Of course damage is under your own responsability.
This evening I will try and see if it works.
Later will update this message.
Thank you all!
Regards!
You do not have the required permissions to view the files attached to this post.
-
Elmexotics
- Posts: 1
- Joined: Sun Sep 07, 2025
- Location: Tacoma/wa
- Country: Usa
- Laser Machine Make or Type: Sgh350
- Laser Power: 50
- Laser Bed Size: 16x20
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: 8
- LightBurn Version: 1.75
- Ruida Controller: RDC6442
- Windows Version: 10
Trying to access files