Hi,
I have a bodor 150W Co2 Metal/non Metal machine.
When Ctting metal the machine uses ruida Live focus system to track the metal surface.
Problem,
I can cut one shape/path but when moving to next shape/path the laser head raises between the cuts.
Timing is wrong and it cuts the next path without focusing.
Basically it is trying to focusing while already cutting resulting in the first bit of the path not cut.
Anybody knows what settings to tweek in RD works or on ruida controller...
Best regards
Metalcut autofocus problem
-
Edvin Buregren
- Posts: 2
- Joined: Sat Apr 08, 2017
- Location: sweden
150 W Bodor Open bed 2500x1300 machine.
Fusion 360, Inkscape, Sketchup
Windows7
RDworks ?.??
Fusion 360, Inkscape, Sketchup
Windows7
RDworks ?.??
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Edvin- I am not aware of any members with metal cutting CO2 machines. If I am wrong, I am sure someone will try to help. which Ruida controller do you have, most of ours are 6442 variations. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Edvin Buregren
- Posts: 2
- Joined: Sat Apr 08, 2017
- Location: sweden
Hi,
Im using RDC6332G. its a timing issue so im guessing its the same for an normal autofocus machine.
Btw I´ve been trying to find the manual on the page here but it seems to be missing ?
Edvin
Im using RDC6332G. its a timing issue so im guessing its the same for an normal autofocus machine.
Btw I´ve been trying to find the manual on the page here but it seems to be missing ?
Edvin
150 W Bodor Open bed 2500x1300 machine.
Fusion 360, Inkscape, Sketchup
Windows7
RDworks ?.??
Fusion 360, Inkscape, Sketchup
Windows7
RDworks ?.??
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
We are rebuilding the site after the big 'crash' and it should be on line soon I hope.
I see that Pete has posted it, lets have a round of drinks for Pete!!
viewtopic.php?f=107&t=3507&sid=0f05ed91 ... d7ee27034b
I see that Pete has posted it, lets have a round of drinks for Pete!!
viewtopic.php?f=107&t=3507&sid=0f05ed91 ... d7ee27034b
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased