Post by Frank Meroney » Fri Mar 03, 2017 3:09 pm
Hi All, I did search already so this is my call for help.
Is there a button, check box, dropdown menu, or other option to scan / engrave from "Bottom Up".. on other machines this is an option to reduce deposits back onto the surface.
by Malcolm Lewis » Fri Mar 03, 2017 3:15 pm
Go to "Handle" and select "Cut optimize" from the drop down and the engraving direction check box is on the right.
GDU 3.11.19
I have always changed the Laser head to the lower position in system setup, it has always worked for me.
Scanning from the bottom up
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased