First usable piece ready

Place to post pictures of work you are proud of.
Post Reply
Matthias Roschk
Posts: 48
Joined: Mon Mar 25, 2019
Location: Merseburg
Country: Deutschland
Laser Machine Make or Type: KH-350 China Laser 644XG
Laser Power: 50W
Laser Bed Size: 500x300
Home Position: TL
RDWorks Version: 8.01.22
Windows Version: Win10

Hello,

i have my first piece ready cut and it is usable , as of my Wife :-)
because i dont know what is really for :D :D :D

Also the mm-cale is very exact !!

Matthias
You do not have the required permissions to view the files attached to this post.
50W China Laser
Top
Pete Cyr
Posts: 1964
Joined: Sun Nov 27, 2016
Location: Suffolk Virginia
Country: United States
Laser Machine Make or Type: Boss 1630
Laser Power: 100w
Laser Bed Size: 16"x30"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.18
Ruida Controller: RDC6442
Windows Version: Win 10
Accessories: roller rotary attachment

Very Nice and useful...but handmade?
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Top
Jeffrey Aley
Posts: 388
Joined: Fri Aug 11, 2017
Location: Folsom, California
Country: United States
Laser Machine Make or Type: Kehui
Laser Power: 50W
Laser Bed Size: 500mmx300mm
Home Position: TL
RDWorks Version: 8.01.24
Ruida Controller: RDC6442
Windows Version: Win10 Enterprise
Accessories: Spray bottle with water (for small fires)
Fire extinguisher (for big fires)

Nicely done. I think you can improve your precision by calibrating the backlash on your machine. I notice that your circles are not quite round, and backlash calibration can fix that. Then it will be even better! You might also check your "small circle speed limit". If you do, I'd try to remember to use a lower min power than the max power (in other words, don't use the same value for both).
Top
Matthias Roschk
Posts: 48
Joined: Mon Mar 25, 2019
Location: Merseburg
Country: Deutschland
Laser Machine Make or Type: KH-350 China Laser 644XG
Laser Power: 50W
Laser Bed Size: 500x300
Home Position: TL
RDWorks Version: 8.01.22
Windows Version: Win10

Yes for sure, all is Handmade.
First done in Corel the dxf file and then cut.

"Handmade by Roschi" is the Brand of my Wife :-)

Matthias
50W China Laser
Top
Matthias Roschk
Posts: 48
Joined: Mon Mar 25, 2019
Location: Merseburg
Country: Deutschland
Laser Machine Make or Type: KH-350 China Laser 644XG
Laser Power: 50W
Laser Bed Size: 500x300
Home Position: TL
RDWorks Version: 8.01.22
Windows Version: Win10

Jeffrey Aley wrote: Fri Mar 29, 2019 Nicely done. I think you can improve your precision by calibrating the backlash on your machine. I notice that your circles are not quite round, and backlash calibration can fix that. Then it will be even better! You might also check your "small circle speed limit". If you do, I'd try to remember to use a lower min power than the max power (in other words, don't use the same value for both).
Hello,

the holes are round. Maybe it is a bit from the Foto.
BUt even i am interested what you mean with Circle calibration.
The Cut is done like in the attached picture.

Matthias
You do not have the required permissions to view the files attached to this post.
50W China Laser
Top
Jeffrey Aley
Posts: 388
Joined: Fri Aug 11, 2017
Location: Folsom, California
Country: United States
Laser Machine Make or Type: Kehui
Laser Power: 50W
Laser Bed Size: 500mmx300mm
Home Position: TL
RDWorks Version: 8.01.24
Ruida Controller: RDC6442
Windows Version: Win10 Enterprise
Accessories: Spray bottle with water (for small fires)
Fire extinguisher (for big fires)

See http://atklaser.co.uk/2016/11/21/battle ... -backlash/ .

For the small circle speed limit, see The Manual, Chapter 3.1.
Top
Matthias Roschk
Posts: 48
Joined: Mon Mar 25, 2019
Location: Merseburg
Country: Deutschland
Laser Machine Make or Type: KH-350 China Laser 644XG
Laser Power: 50W
Laser Bed Size: 500x300
Home Position: TL
RDWorks Version: 8.01.22
Windows Version: Win10

ahhh... that for are these settings ... thx !!
Even my holes looks round i will check that.

Matthias
50W China Laser
Top
Pete Cyr
Posts: 1964
Joined: Sun Nov 27, 2016
Location: Suffolk Virginia
Country: United States
Laser Machine Make or Type: Boss 1630
Laser Power: 100w
Laser Bed Size: 16"x30"
Home Position: TR
Control Software: RDWORKS
RDWorks Version: v8.01.18
Ruida Controller: RDC6442
Windows Version: Win 10
Accessories: roller rotary attachment

https://cartonus.com/how-to-improve-eng ... r-machine/
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Top
Matthias Roschk
Posts: 48
Joined: Mon Mar 25, 2019
Location: Merseburg
Country: Deutschland
Laser Machine Make or Type: KH-350 China Laser 644XG
Laser Power: 50W
Laser Bed Size: 500x300
Home Position: TL
RDWorks Version: 8.01.22
Windows Version: Win10

Thanks...will investigate in that.

Matthias
50W China Laser
Top
Matthias Roschk
Posts: 48
Joined: Mon Mar 25, 2019
Location: Merseburg
Country: Deutschland
Laser Machine Make or Type: KH-350 China Laser 644XG
Laser Power: 50W
Laser Bed Size: 500x300
Home Position: TL
RDWorks Version: 8.01.22
Windows Version: Win10

Hello,
i tried this , and without any changed settings i get this result.
The corners seams not so "sharp" then in the Picture from the website, but they are in line i think.
Or did you see any failures?

Matthias
You do not have the required permissions to view the files attached to this post.
50W China Laser
Top
Post Reply

Return to “Be Proud of Your Work”