Greetings All,
My name is York an I'm from Virginia. I recently purchased a 50w 500x300 unit. I was really disappointed with the lack of direction provided from the manual and my opinion immediately changed after watching a couple of the videos from Russ! THERE IS HOPE YET! Thanks again for the add to the group!
NEW GUY FROM VIRGINIA BEACH VA
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Did you review the links at viewtopic.php?f=148&t=3728York Fee wrote: Fri Apr 12, 2019 Greetings All,
My name is York an I'm from Virginia. I recently purchased a 50w 500x300 unit. I was really disappointed with the lack of direction provided from the manual and my opinion immediately changed after watching a couple of the videos from Russ! THERE IS HOPE YET! Thanks again for the add to the group!
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
York Fee
- Posts: 2
- Joined: Fri Apr 12, 2019
- Location: VIRGINIA BEACH, VIRGINIA
- Country: USA
- Nickname: YORK
- Laser Machine Make or Type: 50W CHINESE
- Laser Power: 50W
- Laser Bed Size: 500X300
- Home Position: TR
- RDWorks Version: V8.01.11
- Windows Version: 10
- Accessories: NOTHING YET NEW TO ME
Just did! Very informative! After looking at the unsafe materials list I'm a little bummed I can't use the laser on Marine starboard since it's HDPE...
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
If you have a scrap of starboard, I would try to cut it. I buy .25" recycled HDPE and while it is not the best of cuts, it is also not the worst. I hear a lot about starboard but have never seen it in real life [that I know of anyway]- a lot of sign makers love it.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased