Good morning everyone. My name is Jason. I recently purchased a Red/Black Chinese laser from eBay. It's 100W. I finally got it installed in my new workshop over the weekend. I'm hoping to get inspiration and hopefully any tech help that may be needed in the future. I'll also do my best to help other new users if I can answer their questions.
Thanks-
Jason
New User
-
Jason Spangler
- Posts: 1
- Joined: Thu May 09, 2019
- Location: Kalamazoo, Michigan
- Country: United States
- Nickname: JasonNT
- Laser Machine Make or Type: Red/White
- Laser Power: 100W
- Laser Bed Size: 700x500mm
- Home Position: TL
- RDWorks Version: 9
- Windows Version: 10
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Jason- you are entering upon a fine adventure [in my opinion]. I would encourage you to record your machine parameters before you go any farther- viewtopic.php?f=104&t=3459 and then at least breeze thru the FAQs. Have fun. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased