I do not have a machine yet. I've been trolling for a long time. I'll most likely get a "Russ Sadler" special. Soon, I hope!
RP
Hello from Brenham Texas
-
Robert Edington
- Posts: 29
- Joined: Fri May 10, 2019
- Location: Brenham, Texas
- Country: United States
- Nickname: RP
- Laser Machine Make or Type: 50 Watt Chinese Ebay laser
- Laser Power: 50w
- Laser Bed Size: 200 x 300
- Home Position: TL
- RDWorks Version: v8
- Windows Version: 10
- Accessories: Rotary
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome RP- if you do some reading here on the forum you will have a good idea what is needed and what is fluff. Sounds like you are watching Russ' videos- you will be way ahead of where I was when I bought mine. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Willy Ivy
- Posts: 174
- Joined: Tue Aug 09, 2016
- Location: Pattison, Texas
- Country: USA
- Nickname: Willy
- Laser Machine Make or Type: KH 7050
- Laser Power: 60W
- Laser Bed Size: 12" x 20"
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: W7 Pro, W10
- Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com) - Contact:
Welcome Robert. One of my daughters graduated in Brenham and moved on to finish at College Station. Also have a good friend in the sheet metal business there. I'm 45 minutes south in Pattison.
As Gene says, you guys are starting out with much more info and knowledge than we had when we got started.
Good luck and be careful, you will become addicted to the laser. Someone may need to start a group session for this addiction.
As Gene says, you guys are starting out with much more info and knowledge than we had when we got started.
Good luck and be careful, you will become addicted to the laser. Someone may need to start a group session for this addiction.
PLEASE! 
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: 
Thank You
Willy
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: Thank You
Willy