I've created an RLD file in v8.01.19. The file looks fine in my version of the software and the simulation runs just fine. I've sent the file for cutting to a dude running v8.01.18. He can't open the file with his version of the software. Is this a version compatibility issue? Or possibly what might be the issue?
Thanks for any help somebody might have for me.
Paul Sutton
Newbie from Hollywood, CA
File created in v8.01.19 not readable in v8.01.18
-
Paul Sutton
- Posts: 5
- Joined: Thu Jul 04, 2019
- Location: Los Angeles/CA
- Country: United States
- Laser Machine Make or Type: CO2
- Laser Power: 100w
- Laser Bed Size: 16" x 30"
- Home Position: TL
- RDWorks Version: 8.01.19
- Windows Version: 10
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
Without a change log unlikely you could figure out what was changed. Best option is to export it as an Adobe Illustrator file then email that over so it can be imported back into the older version at the other end.
I downloaded 8.01.26 just to look at and see how good bad or ugly it is from here http://en.rd-acs.com/down.aspx?TypeId=5 ... 4:50074:14 Interesting Firefox wouldn't download it without an error I finished up having to use Chrome. Not the first download I have had an issue with FF either
I downloaded 8.01.26 just to look at and see how good bad or ugly it is from here http://en.rd-acs.com/down.aspx?TypeId=5 ... 4:50074:14 Interesting Firefox wouldn't download it without an error I finished up having to use Chrome. Not the first download I have had an issue with FF either
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
RDWORKS versions are not backward compatible (18 can't read 19) AND when you try to open 19 in a system loaded with 18 ..the system with 18 is usually fouled up until reinstalled.
If you export files as an *.ai, he will be able to import without any issue.
If you export files as an *.ai, he will be able to import without any issue.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
Paul Sutton
- Posts: 5
- Joined: Thu Jul 04, 2019
- Location: Los Angeles/CA
- Country: United States
- Laser Machine Make or Type: CO2
- Laser Power: 100w
- Laser Bed Size: 16" x 30"
- Home Position: TL
- RDWorks Version: 8.01.19
- Windows Version: 10
As I figured. Thanks so much for verifying the incompatibility issue.
Paul Sutton
Paul Sutton