X Stepper and Y Servo
-
Oggie Baa
- Posts: 4
- Joined: Mon Jul 15, 2019
- Location: Bayern
- Country: Germany
- Laser Machine Make or Type: BODOR
- Laser Power: 150
- Laser Bed Size: 1300x900mm
- Home Position: TR
- RDWorks Version: 8.01.26
- Windows Version: 10
Hello everyone, just wondering if anybody managed to configure the machine to use X Stepper and Y Servo. I tried but since the servo has longer lag (feedforward) it is not working good, and in RDWorks you cannot adjust the axis separately.