RuiDa ACS App

RDWorks Software
Post Reply
Philipp Pap
Posts: 80
Joined: Wed Mar 15, 2017
Location: Innsbruck
Country: Austria
Laser Machine Make or Type: rdc6445
Laser Power: 55W
Laser Bed Size: 50x30cm
Home Position: TL
Control Software: LIGHTBURN
RDWorks Version: lightburn
Ruida Controller: RDC6445
Windows Version: 10

Here is a screenshot from the RuiDa ACS Software, so you can see what the app does.
If you install the software on android you can change the language to english with the gear icon, first item, then the second item.
And it took me some time to figure out that the error message "FAILED!" when adding a device had something to do with my phone running android 9. On a friends tablet with android 8 it just works.

With the app I am able to press "Pulse" and "X+" and "Y-", for example, at the same time, which is nice :lol:
Screenshot_Ruida ACS.jpg
Screenshot_RuiDa ACS v1.00.jpg
You do not have the required permissions to view the files attached to this post.
Top
Philipp Pap
Posts: 80
Joined: Wed Mar 15, 2017
Location: Innsbruck
Country: Austria
Laser Machine Make or Type: rdc6445
Laser Power: 55W
Laser Bed Size: 50x30cm
Home Position: TL
Control Software: LIGHTBURN
RDWorks Version: lightburn
Ruida Controller: RDC6445
Windows Version: 10

The app works with a Ruida RDC6445G(EC) controller with the firmware RDLC-V15.01.10 and there is a discussion about controllers and firmwares here: https://www.rdworkslab.com/viewtopic.php?f=143&t=3581 and a video about the networksetup and such can be found at https://www.youtube.com/watch?v=vLK8ADf ... u.be&t=195
Top
Post Reply

Return to “RDWorks Software”