Hello to RDworks Lab community from western siberia!
I am junior product designer in local FabLab and recently was tasked with operating 60w CO2 Laser-engraver.
Recently stumbled on one of the Russ's videos about lenses and was fascinated by his dedication and research discipline.
Hoping to get better understanding of engraving techniques and photo preparation for engraving
Hello!
-
Mikhail Nov
- Posts: 1
- Joined: Sun Oct 27, 2019
- Location: Tomsk
- Country: Russia
- Nickname: MikNov
- Laser Machine Make or Type: Chinese Co2 engraver
- Laser Power: 60
- Laser Bed Size: 70x40cm
- Home Position: TR
- RDWorks Version: v8.01.42
- Windows Version: 10
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Mikhail- Russ is usually the final authority but we have very smart and helpful members too, so read as much as you can and then ask any questions you might have. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased