Just upgraded rdworks from .11 ( everything was fine) to version .22
now laser does not change from engraving (speed / power) to cut speed / power
any suggestions?
Laser not reconizinfg cut
-
Polly Williams
- Posts: 2
- Joined: Mon Dec 09, 2019
- Location: Pinehurst Texas
- Country: United States
- Laser Machine Make or Type: orin
- Laser Power: 50
- Laser Bed Size: 12 x 20
- Home Position: TL
- RDWorks Version: 8.01.22
- Windows Version: xp
- Accessories: rotary
-
Doug Fisher
- Posts: 206
- Joined: Sat Aug 20, 2016
- Location: Atlanta, Georgia
- Country: USA
- Laser Machine Make or Type: Ke Hui KH-7050
- Laser Power: 80W EFR F2
- Laser Bed Size: 700x500
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18 & 8.01.33
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: Ruida RDC6442G EC controller, 2" lens, S&A CW5000 chiller, chuck type of rotary attachment, Russ' DoHickey (sp?), mA meter, a growing collection of tools and oddities to keep it running!
First thing I would do is to upgrade to at least 8.01.26 which is the last official release on the English website. If I remember correctly, .22 had some bugs in it.
http://en.rd-acs.com/down_complex.aspx? ... ageindex=2
The Chinese site offers the .40 version.
http://www.rd-acs.com/down_complex.aspx ... ageindex=2
http://en.rd-acs.com/down_complex.aspx? ... ageindex=2
The Chinese site offers the .40 version.
http://www.rd-acs.com/down_complex.aspx ... ageindex=2
-
Polly Williams
- Posts: 2
- Joined: Mon Dec 09, 2019
- Location: Pinehurst Texas
- Country: United States
- Laser Machine Make or Type: orin
- Laser Power: 50
- Laser Bed Size: 12 x 20
- Home Position: TL
- RDWorks Version: 8.01.22
- Windows Version: xp
- Accessories: rotary
Thank You Doug - I will update to 26 and see how that goes