Another Newbie
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
Just getting started. Researched the hell out of lasers, and still didn't research enough. Will probably swap controllers somewhere down the line. Will trudge along with AutoLaser until then. Will welcome the change to RDWorks. Too late to send it back...
-
Willy Ivy
- Posts: 174
- Joined: Tue Aug 09, 2016
- Location: Pattison, Texas
- Country: USA
- Nickname: Willy
- Laser Machine Make or Type: KH 7050
- Laser Power: 60W
- Laser Bed Size: 12" x 20"
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- LightBurn Version: 1.6.03
- Ruida Controller: RDC6442
- Windows Version: W7 Pro, W10
- Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com) - Contact:
Welcome Dave. No matter how much research you did, if you bought a Chinese laser, you are going to do even more now. Good luck, do some reading, searching and ask whatever questions you don't find or understand.
PLEASE! 
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: 
Thank You
Willy
CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: Thank You
Willy
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
I think that Autolaser is a rebranded RDworks? If the controller sez Ruida, you got the correct controller.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased