Hello from Italy

New members should make their first post here before posting elsewhere on the forum. Please introduce yourself, your laser machine, your software and what you hope to use the forum for.
If English is not your first language, use the Select Language box at the top right of the forum.
Post Reply
Sergio Subrizi
Posts: 1
Joined: Fri Dec 27, 2019
Location: Rome
Country: Italy
Nickname: Silverdog
Laser Machine Make or Type: chinese 5030 60watts
Laser Power: 60w
Laser Bed Size: 50x30mm
Home Position: TL
RDWorks Version: v.8.01.22
Windows Version: 10

Ciao I'm Sergio from Italy.
I am a maker, I usually build my machines or at least I hacker them heavily :-).
I have a 5030 chinese 60w laser and I use several other machines (from 80watts chinese to Bodor 1390) in fablabs, at school (Rome University of Fine Arts) or friends ...
I am here because machines have always more secrets than my mind storage capacity :-)
Top
Willy Ivy
Posts: 174
Joined: Tue Aug 09, 2016
Location: Pattison, Texas
Country: USA
Nickname: Willy
Laser Machine Make or Type: KH 7050
Laser Power: 60W
Laser Bed Size: 12" x 20"
Home Position: TL
Control Software: LIGHTBURN
RDWorks Version: v8.01.18
LightBurn Version: 1.6.03
Ruida Controller: RDC6442
Windows Version: W7 Pro, W10
Accessories: Hot dog rotary
Gantry powered rotary (plans supplied by Gene Uselman)
Lightburn camera
Homemade chiller (mini fridge)
Ultimate air assist
Dad Burn It Laser (.com)
Contact:
Contact Willy Ivy

Welcome Sergio. Yeah, I need to add some more memory to my bank but I forgot how to do that. Luckily we have this forum to help us out with some of that memory thing and by doing a search will usually produce some good help. Lots of good guys here ready to help with questions you may run across.
PLEASE! ;) CONSIDER A DONATION TO THIS FORUM AS THERE ARE COST[s] INVOLVED TO KEEP IT MAINTAINED AND AVAILABLE FOR ALL TO USE. [en]VISION CHINESE LASER HELP WITHOUT IT.https: :o
Thank You
Willy
Top
Post Reply

Return to “New Members - Introduce Yourself First”