Loaded up 8.01.44... no problem. Directory is labeled V8.01.44-191015 ( I'm assuming that's a, October 15th 2019 build )
Set up the export macro for Corel 2017, Had to do the find path, but it thought it had no problem.
When I open Corel I get a Microsoft Visual Basic Run-time error '-2147467259' Object not found in collection. I've run a repair on my Corel install. No problem other than I had to reinstall a few other macro's. Everything else loads just fine except for the RDWorks macro. Went back and did the plug option as well as the find path, no change.
I"m running Win7 32 bit if that makes a difference.
Corel Macro
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
Update, It seems to be computer specific, no problems on a second PC. Have to go hunting...
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
Progress made.
Got a copy of .38 from Russ. The macro installed into Corel properly, but now I'm getting an RDWorks System Error when the macro runs.
Seems it wants MarkProMgr.dll. I've done a search on the other computer RDWorks /Corel is installed on and can't find it. Only difference between the two is 32 bit vs 64bit. The problem child being the 32bit.
Anybody have a copy of this dll?
Got a copy of .38 from Russ. The macro installed into Corel properly, but now I'm getting an RDWorks System Error when the macro runs.
Seems it wants MarkProMgr.dll. I've done a search on the other computer RDWorks /Corel is installed on and can't find it. Only difference between the two is 32 bit vs 64bit. The problem child being the 32bit.
Anybody have a copy of this dll?