LaserUser.com Forum (formerly RDWorksLab)

My name is Rob. I'm retired Air Force, and purchased my laser about a month ago. I am hoping to set up a retirement business. Everything working great until yesterday. I cleaned my lens, and was set to pulse to align the LED. Laser wouldn't fire. Checked all the usual suspects, everything seemed fine. Tried to reset the factory parameters, now everything messed up. Bed won't move, makes a grinding noise. X and Y axis move, but only about 8 inches and move opposite direction from arrows on the control panel. The only good new is I moved the wires from the laser control on the main board to the second laser head (not used). Now the laser will fire, but everything else messed up. Any help would be appreciated.
Rob

Welcome Rob. This is a great forum with lots of help from guys that have been there and done that on many issues.
Please move your questions and problems with your laser to "Questions and Help" as you will be more likely to find answers. Not everyone reads the
"Tell us about you" section.

Hi Rob- I have a similar sized machine but mine homes to the right rear. The files are here.. viewtopic.php?f=100&t=4606

If you are not familiar with what you are going to do... let us help.