Question on cutting different wood species
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
I cut a lot of 1/8" solid and 1/4" mdf core plywood but I am not a woodworker by any stretch. Is there a species that is less dense than pine, I kinda need to cut 3/4" letters from something readily available at a reasonable price. I have HDU but that is too pricey for this fellow. I could cut with the CNC but there are a tonne of letters and I don't want to waste the rest of my lifeforce on this. Thanks Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
Gene,
I would get some 3/8" Premium MDF and double it up. With your 130W you should have no problem with the 3/8" ( 9mm ).
I'm planning on that for some 'shelf stand' items for her. Haven't gotten quite that far trying the 2.5" lens on it with my 80W, but it is on the future project list.
I would get some 3/8" Premium MDF and double it up. With your 130W you should have no problem with the 3/8" ( 9mm ).
I'm planning on that for some 'shelf stand' items for her. Haven't gotten quite that far trying the 2.5" lens on it with my 80W, but it is on the future project list.
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Janka is a scale used to measure the hardness of woods - If you google "Basswood janka scale" you will get "Basswood has a Janka hardness rating of 410..."
Lots of folks like to carve basswood because it is soft and cuts clean - I have no idea how is cuts with a laser but it is softer than pine by 40% or so depending on the type of pine.
Lots of folks like to carve basswood because it is soft and cuts clean - I have no idea how is cuts with a laser but it is softer than pine by 40% or so depending on the type of pine.
You do not have the required permissions to view the files attached to this post.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Good info, thank you Sir.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
Not for this job @Gene maybe due to time/costs.
In the past I have made Balsa/Ply laminates using 1/8-1/4" Balsa skinned with 0.4 or 0.6mm ply. These were then used for lightweight bulkheads in R/C aircraft when glued together. Balsa BTW cuts great on a Laser but might be to soft for your needs. I also have some straight Poplar Laser ply (not just skinned in poplar) which cuts really well too 3mm on my little 40W runs easily.
So DIY your own laminates and play
In the past I have made Balsa/Ply laminates using 1/8-1/4" Balsa skinned with 0.4 or 0.6mm ply. These were then used for lightweight bulkheads in R/C aircraft when glued together. Balsa BTW cuts great on a Laser but might be to soft for your needs. I also have some straight Poplar Laser ply (not just skinned in poplar) which cuts really well too 3mm on my little 40W runs easily.
So DIY your own laminates and play
-
Gary Thompson
- Posts: 31
- Joined: Tue Aug 27, 2019
- Location: Belfast
- Country: Northern Ireland
- Nickname: Gary
- Laser Machine Make or Type: Mantech
- Laser Power: 60W
- Laser Bed Size: 600 x 400
- Home Position: TL
- RDWorks Version: v8.01.16
- Windows Version: 10
- Accessories: Rotary attachment
Gene. I've cut 8mm Jelutong, which has similar qualities to basswood, for lightweight boxes (speed/power settings about the same as for 6mm acrylic) and it's a decent job. The wood's a bit bland but lacquers up nicely. Price in the UK £18.00 per square metre for that thickness and thicker planks are available. I assume it's available in the US.
-
Jeffrey Aley
- Posts: 388
- Joined: Fri Aug 11, 2017
- Location: Folsom, California
- Country: United States
- Laser Machine Make or Type: Kehui
- Laser Power: 50W
- Laser Bed Size: 500mmx300mm
- Home Position: TL
- RDWorks Version: 8.01.24
- Ruida Controller: RDC6442
- Windows Version: Win10 Enterprise
- Accessories: Spray bottle with water (for small fires)
Fire extinguisher (for big fires)
I've done walnut, oak, pine, basswood, and balsa. I listed them in order, from hardest (walnut is a pain to cut) to softest (balsa cuts like butter).
Of course, with natural woods, the density is non-uniform - knots, etc. are much harder to cut. Also beware of the oils in the wood. Walnut leaves a terrible creosote residue after cutting - but simple masking tape (applied BEFORE cutting) takes care of the clean-up.
Of course, with natural woods, the density is non-uniform - knots, etc. are much harder to cut. Also beware of the oils in the wood. Walnut leaves a terrible creosote residue after cutting - but simple masking tape (applied BEFORE cutting) takes care of the clean-up.