Does anyone have experience using RDC6332M
-
Tripp Pope
- Posts: 4
- Joined: Tue Apr 21, 2020
- Location: Rocklin CA
- Country: USA
- Laser Machine Make or Type: Dowel
- Laser Power: 300
- Laser Bed Size: 56" x 120"
- Home Position: BL
- RDWorks Version: V8
- Windows Version: 10
We purchased a laser with this controller. It came from China with poor wiring, I would like to rewire it but can not find a solid wiring diagram for this controller. I would appreciate any help from a wiring diagram to anyone with experience of how to wire this controller.
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
Ruida's website fairly much sucks when it comes to searching. It leads you to the Chinese language version but with a bit of playing I found this page https://780083804obx.scd.wezhan.cn/news ... 41573.html which while it links you to the manual for the G variant it might help you along
Most of the nomenclature and labels should also be common with their other controllers so the snip below should give you a better handle on what goes where as the G manual doesn't seem to have an overview diagram unlike their other manuals.
EDIT: Just found one that includes their live Focus system but leave it out and you should hopefully have what you need
Most of the nomenclature and labels should also be common with their other controllers so the snip below should give you a better handle on what goes where as the G manual doesn't seem to have an overview diagram unlike their other manuals.
EDIT: Just found one that includes their live Focus system but leave it out and you should hopefully have what you need
You do not have the required permissions to view the files attached to this post.