Hi everyone,
I'm Felix. I came here as many others through Russ's youtube videos. After one year of 3d printing I expanded my hobby with a 9060 CO2 laser. I had hard times to calibrate my mirrors only to find out later that my first mirror was almost opaque because of dirt. The first mirror is somehow difficult to check, so my first lesson was to pull off the first mirror from its place. I'm waiting for a 5mW point laser that I ordered yesterday and I hope that it will be much easy to calibrate the mirrors.
Regards,
Felix
Hello from Romania
-
Felix Bordea
- Posts: 1
- Joined: Wed Apr 29, 2020
- Location: Arad
- Country: Romania
- Laser Machine Make or Type: 9060 Ruida 6442S Controller
- Laser Power: 100W
- Laser Bed Size: 900mm X 600mm
- Home Position: TL
- RDWorks Version: 8.01.33
- Windows Version: Windows 10
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Welcome Felix. Hope you find some of the data here of use - enjoy.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete