Page 1 of 1
Please edit your profiles to indicate if you have a 6442 or 6445 controller
Posted: Thu May 14, 2020
by Gene Uselman
Pete has added an indication of which Ruida controller you have to the profiles that members fill out when they join, I expect that it may avoid some confusion in the future. Existing members, click your name and then on Profile, and then Edit Profile please. Especially the members who have new machines with the 6445 controllers and those who have upgraded to the newer controller. Thanks Gene
Re: Please edit your profiles to indicate if you have a 6442 or 6445 controller
Posted: Thu May 14, 2020
by Jeffrey Aley
Perhaps it would be helpful to remind us how we can tell the difference. RDWorks 8.01.24 just shows that I have a 644XG, with no indication if X=2 or X=5. And my controller has no label on it at all.
Thanks!
-Jeff
Re: Please edit your profiles to indicate if you have a 6442 or 6445 controller
Posted: Thu May 14, 2020
by Gene Uselman
Most of our controllers are 6442s- the 6445 was released in 2019 I believe and the readout is larger- 6445 below:
RDC6445G.jpg
Re: Please edit your profiles to indicate if you have a 6442 or 6445 controller
Posted: Thu May 14, 2020
by Pete Cyr
Jeffrey Aley wrote: Thu May 14, 2020
Perhaps it would be helpful to remind us how we can tell the difference. RDWorks 8.01.24 just shows that I have a 644XG, with no indication if X=2 or X=5. And my controller has no label on it at all.
Thanks!
-Jeff
You ripped off the "TAG" - You do know the Mattress Police also inspect the "TAGs" on laser controllers - You are in big trouble Mister
Re: Please edit your profiles to indicate if you have a 6442 or 6445 controller
Posted: Fri May 15, 2020
by Jeffrey Aley
Pete Cyr wrote: Thu May 14, 2020
Jeffrey Aley wrote: Thu May 14, 2020
Perhaps it would be helpful to remind us how we can tell the difference. RDWorks 8.01.24 just shows that I have a 644XG, with no indication if X=2 or X=5. And my controller has no label on it at all.
Thanks!
-Jeff
You ripped off the "TAG" - You do know the Mattress Police also inspect the "TAGs" on laser controllers - You are in big trouble Mister
I am insulted, sir. How dare you say that I ripped off the tag. I did NOT rip off any tag. I lasered it off! LOL
Re: Please edit your profiles to indicate if you have a 6442 or 6445 controller
Posted: Fri May 15, 2020
by Pete Cyr
Jeffrey Aley wrote: Fri May 15, 2020
Pete Cyr wrote: Thu May 14, 2020
You ripped off the "TAG" - You do know the Mattress Police also inspect the "TAGs" on laser controllers - You are in big trouble Mister
I am insulted, sir. How dare you say that I ripped off the tag. I did NOT rip off any tag. I lasered it off! LOL :-) :-)
Oh! Well, that is entirely different: Sub sect 113 of Mattress Ordnance 27652A Cites "Controller Tags removed by Laser acceptable to access terminal connection in pursuit of repair providing that Objective Quality Evidence is affixed inside the left upper corner unless the corner is radiused greater than 1/4" to 6mm as measure with photogrammetry.