Hello!
I am going to build a further laser y-400, and I am here from Tim Mellor, who did an amazing job with a wiring diagram.
I am a beginner when it comes to electronics wiring, so that is what I will be looking for help with.
Thanks
Hello!
-
Noah Diamond
- Posts: 1
- Joined: Tue Jun 23, 2020
- Location: North Carolina
- Country: USA
- Laser Machine Make or Type: Further y-400
- Laser Power: 45w
- Laser Bed Size: 400x600
- Home Position: TL
- RDWorks Version: v8.01.8
- Ruida Controller: RDC6442
- Windows Version: 10
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Welcome Noah - I am sure Tim is up to the task to provide any and all assistance - great guy and very helpful.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
Tim Mellor
- Posts: 560
- Joined: Wed May 29, 2019
- Location: Shipwreck Coast, Victoria
- Country: Australia
- Nickname: beanflying
- Laser Machine Make or Type: Vollerun WR3020
- Laser Power: 40W
- Laser Bed Size: 300x200
- Home Position: TR
- RDWorks Version: n/a
- Windows Version: 10
- Accessories: Modded and still Modding some more.
Welcome Noah,
much easier to have a bit more space to put some information in than Farcebook PM's
My return there is about up with maybe a very very occasional return to the Laser Builders Guild group to share something.
@ Pete careful I might Blush
much easier to have a bit more space to put some information in than Farcebook PM's
My return there is about up with maybe a very very occasional return to the Laser Builders Guild group to share something.@ Pete careful I might Blush
-
Neil Palmer
- Posts: 15
- Joined: Fri May 15, 2020
- Location: Glenrothes, Fife
- Country: United Kingdom
- Nickname: Neil
- Laser Machine Make or Type: Further Laser Fabrication
- Laser Power: 100
- Laser Bed Size: 1200 x 600
- Home Position: TL
- RDWorks Version: 8.01.47
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: Red Laser Pointer, Auto Depth set
Hi Noah
I have just finished the 1200 build from Further.
I changed the layout design somewhat but the electronics was pretty straight forward.
The one thing I was sure to do was put in circuit breakers on all lines especially the one that powered the HV. That way I could work on the machine without having to worry about the HV till I was ready to do so/
As I now have a 4 mirror set up I am finding the alignment a trifle more complex, but am waiting for a new adjustable head mount that will make it considerably easier.
Good luck and anything I can help with message me.
Neil
I have just finished the 1200 build from Further.
I changed the layout design somewhat but the electronics was pretty straight forward.
The one thing I was sure to do was put in circuit breakers on all lines especially the one that powered the HV. That way I could work on the machine without having to worry about the HV till I was ready to do so/
As I now have a 4 mirror set up I am finding the alignment a trifle more complex, but am waiting for a new adjustable head mount that will make it considerably easier.
Good luck and anything I can help with message me.
Neil