Page 1 of 1
Hello!
Posted: Tue Jun 23, 2020
by Noah Diamond
Hello!
I am going to build a further laser y-400, and I am here from Tim Mellor, who did an amazing job with a wiring diagram.
I am a beginner when it comes to electronics wiring, so that is what I will be looking for help with.
Thanks
Re: Hello!
Posted: Tue Jun 23, 2020
by Pete Cyr
Welcome Noah - I am sure Tim is up to the task to provide any and all assistance - great guy and very helpful.
Re: Hello!
Posted: Tue Jun 23, 2020
by Tim Mellor
Welcome Noah,
much easier to have a bit more space to put some information in than Farcebook PM's
My return there is about up with maybe a very very occasional return to the Laser Builders Guild group to share something.
@ Pete careful I might Blush
Re: Hello!
Posted: Mon Jun 29, 2020
by Neil Palmer
Hi Noah
I have just finished the 1200 build from Further.
I changed the layout design somewhat but the electronics was pretty straight forward.
The one thing I was sure to do was put in circuit breakers on all lines especially the one that powered the HV. That way I could work on the machine without having to worry about the HV till I was ready to do so/
As I now have a 4 mirror set up I am finding the alignment a trifle more complex, but am waiting for a new adjustable head mount that will make it considerably easier.
Good luck and anything I can help with message me.
Neil