Hey guys, need to pick a few brain cells.
Going through some issues, and was going to upgrade the HMI software on my 6445G. I'm at .05 and Ruida has .07 on their web site.
I can log in via RD8888, and HF888 and CC8888 give me a password error. Problem is it, the controller or RDWorks, is giving me the electronic finger when I try and upgrade the HMI firmware. Is there a different password used for HMI vs RDC upgrades? I've done several RDC upgrades and never run into this.
HMI Upgrade password
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing