Ultimate Air Assist without connection/wiring diagram

Post Reply
Tom Skram
Posts: 7
Joined: Sun Jul 19, 2020
Location: Oslo
Country: Norway
Nickname: tingvald
Laser Machine Make or Type: Redsail CM 1390
Laser Power: 100
Laser Bed Size: 1300mm x 900 mm
Home Position: BR
RDWorks Version: 8.01.18
Ruida Controller: RDC6442
Windows Version: 10,0,18362 Build 183
Accessories: Water Cooler CW-5200, Air from air cool drought central system in my work shop.
Exhaust system via self-made low noise (24dB) exhaust system to make the machine as quiet as possible.
Honeycomb and blade bed with adjustable work table.
Auto focus

I just got the from Ultimate Air Assist from Cloudray but without connection/wiring diagram.
If possible, could someone of you take a picture of it and email it to me?
My email is: tomerik@newtone.no
Best Regards
Tom Erik
Top
User avatar
Gene Uselman
Posts: 2180
Joined: Thu Jul 07, 2016
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

It is on Cloudray's website.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.


The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Top
Tom Skram
Posts: 7
Joined: Sun Jul 19, 2020
Location: Oslo
Country: Norway
Nickname: tingvald
Laser Machine Make or Type: Redsail CM 1390
Laser Power: 100
Laser Bed Size: 1300mm x 900 mm
Home Position: BR
RDWorks Version: 8.01.18
Ruida Controller: RDC6442
Windows Version: 10,0,18362 Build 183
Accessories: Water Cooler CW-5200, Air from air cool drought central system in my work shop.
Exhaust system via self-made low noise (24dB) exhaust system to make the machine as quiet as possible.
Honeycomb and blade bed with adjustable work table.
Auto focus

Hi.
The only thing I find is this picture of the connection of the device.
This does not help me at all:-)
You do not have the required permissions to view the files attached to this post.
Top
Hector Munoznavarro
Posts: 11
Joined: Fri Aug 21, 2020
Location: Springfield, Virginia
Country: United States
Nickname: Tainoworks
Laser Machine Make or Type: Preenex (Blue and White)
Laser Power: 80W
Laser Bed Size: 300 X 500
Home Position: TL
RDWorks Version: 8.01.47
Ruida Controller: RDC6442
Windows Version: 10
Accessories: Rotary, commercial chiller, auto-focus, air assist, interior LED lights, Lightburn cameras, work status lights, watt, and water temperature meter, network with WiFi repeater, z-axis motorized before autofocus, remote monitoring via USB camera, high-efficiency exhaust fumes extractor, and a custom enclosure for the 80-watt tube.
Contact:
Contact Hector Munoznavarro

I'm sorry to hear that you are trouble with the diagram. I was also a bit confused when I saw it for the first time. I was able to work thru the connection paths after watching Russ at RDWorks Learning Labs in Youtube: https://www.youtube.com/watch?v=ZKC8Byc8y28 He explains the process step-by-step. Try it you won't go wrong...
Top
Brian Book
Posts: 59
Joined: Sat Dec 03, 2016
Location: Burlington, Ontario Canada
Country: Canada
Laser Machine Make or Type: Rayfine
Laser Power: 80W
Laser Bed Size: 24" x 16"
Home Position: TL
RDWorks Version: v18.01.18
Ruida Controller: RDC6442
Windows Version: 10
Accessories: Chuck Rotary

Hello ... I too was confused on how to wire everything up .... this video is also a step by step if it helps.

https://www.youtube.com/watch?v=iNEYCQQ8PZU

Brian
Ray Fine 80w 6040 110v TL
Chuck Style Rotary
RDWorks 8.01.18
Corel Draw 6

Brian
Top
User avatar
Gene Uselman
Posts: 2180
Joined: Thu Jul 07, 2016
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

I am going to copy this thread to the FAQ section as I would guess it is a common problem, Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.


The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Top
User avatar
Gene Uselman
Posts: 2180
Joined: Thu Jul 07, 2016
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

Here is my interpretation of the schematic- hope it helps. If you see a mistake let me know and I will fix it.

.
Ultimate air assist 8.20210.jpg
You do not have the required permissions to view the files attached to this post.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.


The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Top
Oleksandr Masliukivskyi
Posts: 5
Joined: Mon Jun 15, 2020
Location: Zhytomyr
Country: Ukraine
Nickname: 3DUA
Laser Machine Make or Type: DIY
Laser Power: 90
Laser Bed Size: 90x60
Home Position: TR
Control Software: RDWORKS
RDWorks Version: 8.01.48
Ruida Controller: RDC6445
Windows Version: 10
Accessories: Inbuilt red dot (SPT), inbuilt fumes filter.

Russ newest video dedicated to the wiring: https://youtu.be/RvxgCQinS_c?t=1684
Top
Post Reply

Return to “Support Equipment - ie: exhaust fan, compressors”