Requisite Hello
Posted: Thu Sep 03, 2020
Ours is a generic Chinese-made machine with no manufacturing info visible anywhere. It has a Ruida controller and seems to work well enough so far.
We are a small company that upfits trucks and RVs for emergency response, for example fire and police mobile command centers. We are branching out into other vehicle-related areas. The laser will start out with making identification labels and then whatever else we can think of.
I've used a few different machines at the local DIY or maker space so I've been deemed the house expert. I may have a lot of basic questions.
We are a small company that upfits trucks and RVs for emergency response, for example fire and police mobile command centers. We are branching out into other vehicle-related areas. The laser will start out with making identification labels and then whatever else we can think of.
I've used a few different machines at the local DIY or maker space so I've been deemed the house expert. I may have a lot of basic questions.
] and ask whatever questions you may have. I use quite a bit of Duets and Rowmark plastics with micro layers of a second color and find them very handy. I do work for the local fire depts and make different placards for there vehicles. I just got a few samples of three layer plastics from Romark and can see some applications for that as well. I was expecting a base color with a micro layer on the front and back for two sided signs but it instead allows two colors and the base on one surface only. Gene