Hello to all.
I have a problem when I try to import some .dxf files on RDWoks.
I can see the file pefectly on Autocad, but when I try to open it on RDWorks, it looks like dashed. The entire file is spline.
Can someone help me?
Thanks so much!
Norberto
PROBLEMS WITH SOME DXF FILES.
-
Norberto Stabile
- Posts: 2
- Joined: Sun Aug 30, 2020
- Location: Capital Federal
- Country: Argentina
- Nickname: Deltafly
- Laser Machine Make or Type: ML-6090H
- Laser Power: 120
- Laser Bed Size: 23" x 35"
- Home Position: TR
- RDWorks Version: 8.01.33
- Ruida Controller: Other
- Windows Version: 10 64bit
You do not have the required permissions to view the files attached to this post.
-
Hans Nieborg
- Posts: 3
- Joined: Mon Nov 28, 2016
- Location: Tennessee - USA
- Country: USA
- Nickname: HANS
- Laser Machine Make or Type: Ke Hui - Red Sail Type
- Laser Power: 60W & 100W
- Laser Bed Size: 500x700
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: V8.01.19
- LightBurn Version: V1.0.00
- Ruida Controller: RDC6442
- Windows Version: 7 Pro Ultimate
- Accessories: Home-Built Refrigerated Water Chiller, 3-Roller Rotary Device, Analog Ammeters, LED Strip Illumination, Crosshair Laser Pointers.
Had the same problem with ACAD DXFs at higher than 2010, so I batch-down save my 2014 ACAD DXFs to 2010 format and my RD6552G w/ Ver 19 accepts it fine.
Ke Hui 7050, 60W (53W Real) & 100W (82W Real) 70x50cm, 2" & 2.5" FL Lenses, 6442G Controllers, RDWorks V8.01.19, Refrigerated Chiller, In-Home Install, Home = TR.
Retired Design Engineer - High Power Motor Controls. In My New Hobby-Business, I Create For Geocachers, RPG Gamers & The Cons (DragonCon, MegaCon, ComicCon).
Hans
Retired Design Engineer - High Power Motor Controls. In My New Hobby-Business, I Create For Geocachers, RPG Gamers & The Cons (DragonCon, MegaCon, ComicCon).
Hans