honeybed pins
-
Bryan Kelly
- Posts: 63
- Joined: Wed Oct 21, 2020
- Location: Ontario
- Country: Canada
- Nickname: BCK
- Laser Machine Make or Type: (Ketai) KT 9060...
- Laser Power: EFR-F2-80 watt
- Laser Bed Size: 900x600
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: V8.01.48
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: honeycomb bed, Hiwin linear guide rails, mA meter, rotary, digital water flow meter w/temp, material pass through, red dot, electric table. 1/4 hp sea line pro 300A chiller..
cheaper than magnets, total scrap made..idea I found, not made..but is a good idea and works...east to adjust if needed..
You do not have the required permissions to view the files attached to this post.
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Very nice. Be aware one of the short comings of the honeycomb beds is a build up of resins which has been know to create fires.
There are couple of products that can be used to clean the honeycomb...I prefer Purple ..a degreaser sold In most auto stores.
It takes a bit of time to build up enough resin to be a problem but you must be vigelent
There are couple of products that can be used to clean the honeycomb...I prefer Purple ..a degreaser sold In most auto stores.
It takes a bit of time to build up enough resin to be a problem but you must be vigelent
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
Bryan Kelly
- Posts: 63
- Joined: Wed Oct 21, 2020
- Location: Ontario
- Country: Canada
- Nickname: BCK
- Laser Machine Make or Type: (Ketai) KT 9060...
- Laser Power: EFR-F2-80 watt
- Laser Bed Size: 900x600
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: V8.01.48
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: honeycomb bed, Hiwin linear guide rails, mA meter, rotary, digital water flow meter w/temp, material pass through, red dot, electric table. 1/4 hp sea line pro 300A chiller..
couldnt agree more, clean most things before they look like they need a cleaning, I think, and not just the fire hazards, and your machine and accessories will treat you, as good as you treat it..I think of the time I'd spend doing some of these projects we do, with a scroll saw, then take one tenth of that time you save, to take care of the machine that gives you this time...lol..and your whole machine, but consumables, would look new for a very long time...