Hi!
I'm quite new to laser world.
I have a 60W machine an use RDworks v8.01.48 with a CorelDraw X8 and macro plugin.
Mostly draw stuf in Corel then import to RDW.
I'm looking to upgrade to Corel2020 and RDW 4.01.49.
and i'm looking for information if the .49 version will work on Corel 2020 before i upgrade.
Hello
-
Samo Lipovnik
- Posts: 1
- Joined: Thu Oct 29, 2020
- Location: Paris
- Country: France
- Nickname: Phantomas
- Laser Machine Make or Type: 644XG
- Laser Power: 60W
- Laser Bed Size: 300x500cm
- Home Position: TR
- RDWorks Version: v8.01.48
- Ruida Controller: RDC6445
- Windows Version: Win10
- Accessories: no
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Samo- I cannot help with the version .49 or Corel as I don't use either of them, but I am guessing some of the members will chime in. You might want to try the trial version of Lightburn as they also have Corel support I believe. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Bryan Kelly
- Posts: 66
- Joined: Wed Oct 21, 2020
- Location: Ontario
- Country: Canada
- Nickname: BCK
- Laser Machine Make or Type: (Ketai) KT 9060...
- Laser Power: EFR-F2-80 watt
- Laser Bed Size: 900x600
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: V8.01.48
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: honeycomb bed, Hiwin linear guide rails, mA meter, rotary, digital water flow meter w/temp, material pass through, red dot, electric table. 1/4 hp sea line pro 300A chiller..
welcome aboard...I use inkscape for design so not sure on corel either, but sure someone will be able to help,,,enjoy