About me
-
Bert Sanchez
- Posts: 1
- Joined: Tue Jan 12, 2021
- Location: Los Angeles CA
- Country: USA
- Nickname: Bert
- Laser Machine Make or Type: Laguna Laser EX
- Laser Power: 150W
- Laser Bed Size: 36" x 51"
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: v8.01.25
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: CCD Vision Camera
Hello everyone, my name is Bert, I live in Los Angeles CA, I am a graphic designer and I have a Reci Laser Tube 150W laser machine, Table Dimensions: 36 ″ x 51 ″
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Bert- we advise recording your Vendor and User parameters [see the FAQ section]. And from there... have fun and ask questions you may have or think of. Gene
I am struggling with two Reci W6 tubes now that have a laser beam output that looks like an 'O' instead of a solid beam- one is in a new machine we bought and the other I bought from a different vendor to replace a tube in a machine I am selling. By the time the beam goes downstream to the laser head it is almost as large as the 'tunnel' going into the laser head and, if not perfectly aligned will clip. What does your beam look like? Thanks Gene
I am struggling with two Reci W6 tubes now that have a laser beam output that looks like an 'O' instead of a solid beam- one is in a new machine we bought and the other I bought from a different vendor to replace a tube in a machine I am selling. By the time the beam goes downstream to the laser head it is almost as large as the 'tunnel' going into the laser head and, if not perfectly aligned will clip. What does your beam look like? Thanks Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased