Hello Ladies and Gent,
Just a novice CNC laser user. Started off with a Ortur Laser Master2 20W and it just wasn't cutting it! so I decided to get a Co2 laser and challenge myself to learn as much as possible about it. Right out of the gate it was a rocky road. During shipping the machine had taken a sever hit breaking 3 of the 4 lag bolts holding it to the pallet. Every cover on this thing is either scratched or dented making it have some character for sure. Unfortunately the original 60W tube was broken in transit. The reasoning for upgrading to a 90/100W cloudray tube. Made ALOT of mistakes along the way making this a working machine, but I'm muddling my through.
Hello
-
Leo Lidwell
- Posts: 5
- Joined: Sun Jan 31, 2021
- Location: Cresson, PA
- Country: U.S.A.
- Nickname: Bud
- Laser Machine Make or Type: Orion Motor tech
- Laser Power: 60W
- Laser Bed Size: 28"x20"
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: 8.00.65
- Ruida Controller: RDC6442
- Windows Version: 10
- Accessories: upgraded tube to a Cloudray 90/100W, Upgraded power supply. Installed remote mA gauge, 6" exhaust with variable speed controller
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Welcome Leo, recommend you backup your vendor settings if you have not already.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete