Hello
Posted: Sun Jan 31, 2021
Hello Ladies and Gent,
Just a novice CNC laser user. Started off with a Ortur Laser Master2 20W and it just wasn't cutting it! so I decided to get a Co2 laser and challenge myself to learn as much as possible about it. Right out of the gate it was a rocky road. During shipping the machine had taken a sever hit breaking 3 of the 4 lag bolts holding it to the pallet. Every cover on this thing is either scratched or dented making it have some character for sure. Unfortunately the original 60W tube was broken in transit. The reasoning for upgrading to a 90/100W cloudray tube. Made ALOT of mistakes along the way making this a working machine, but I'm muddling my through.
Just a novice CNC laser user. Started off with a Ortur Laser Master2 20W and it just wasn't cutting it! so I decided to get a Co2 laser and challenge myself to learn as much as possible about it. Right out of the gate it was a rocky road. During shipping the machine had taken a sever hit breaking 3 of the 4 lag bolts holding it to the pallet. Every cover on this thing is either scratched or dented making it have some character for sure. Unfortunately the original 60W tube was broken in transit. The reasoning for upgrading to a 90/100W cloudray tube. Made ALOT of mistakes along the way making this a working machine, but I'm muddling my through.