Greetings,
Been building a Y-1200 design from FurtherFabrications and now I'm ready to start setting up the Ruida. I've messed around with a K-40 and did fairly well with that, now looking to expand my cutting area. I've modded the Y-1200 design to have a cut area of 48" x 36" with a Z range of 18".
About me... I'm 39 with 4 boys ages 5-14, retired from the US Army as a CH-47F pilot and doing laser cutting and engraving as a hobby, maybe small part-time business one day.
New Build from Indiana, US
-
Robert Icona
- Posts: 1
- Joined: Thu Apr 01, 2021
- Location: Evansville, IN
- Country: United States
- Nickname: Rob
- Laser Machine Make or Type: Y-1200
- Laser Power: 80W
- Laser Bed Size: 48" x 36"
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: 0.9.22
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: CW-5202 Chiller
-
Pete Cyr
- Posts: 1964
- Joined: Sun Nov 27, 2016
- Location: Suffolk Virginia
- Country: United States
- Laser Machine Make or Type: Boss 1630
- Laser Power: 100w
- Laser Bed Size: 16"x30"
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6442
- Windows Version: Win 10
- Accessories: roller rotary attachment
Welcome Robert - be sure to back up your vendor setting if you have not already.
Location - VA
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
Equipment - Boss Laser 1630
Power - 100W
Laser Bed Size - 16" x 30"
Home Position - TR
Full RDWorks Version - v8.01.18
First name - Pete
-
Rodney Edington
- Posts: 97
- Joined: Wed Feb 24, 2021
- Location: Leavenworth Ks
- Country: USA
- Nickname: Rodney
- Laser Machine Make or Type: K 40 Building a 22"X 38"
- Laser Power: 60 watt
- Laser Bed Size: 22"X38"
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: NA
- Ruida Controller: RDC6445
- Windows Version: 7
Welcome to the board, Robert.
I'm a couple of weeks away from setting up my Ruida RDC6445G from Cloudray. Would you please do a step by step thread on your setup. There are several people building the Y 1200 and it may help them also.
Thanks
I'm a couple of weeks away from setting up my Ruida RDC6445G from Cloudray. Would you please do a step by step thread on your setup. There are several people building the Y 1200 and it may help them also.
Thanks