Hi,
Is there a possibility to programming the function of the OUT1 and OUT2 on a Ruida6445G.
When installing a magnetic valve with protection diode everything works on OUT1 but in reverse, so laser is valve off. I do not measure any voltage at the wind output, both when laser on or off. The controller is new (1 month).
Programming OUT1 en 2 for Ruida6445G
-
Raoul Braem
- Posts: 9
- Joined: Sun Feb 28, 2021
- Location: Harelbeke, West Flanders
- Country: Belgium
- Laser Machine Make or Type: CNC1060 engraver machine RECI100C CO2, RD6445G(EC)
- Laser Power: 100
- Laser Bed Size: 100x60 cm
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.00.32
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: PC, Chiller 5200, fume purification equipment
-
Raoul Braem
- Posts: 9
- Joined: Sun Feb 28, 2021
- Location: Harelbeke, West Flanders
- Country: Belgium
- Laser Machine Make or Type: CNC1060 engraver machine RECI100C CO2, RD6445G(EC)
- Laser Power: 100
- Laser Bed Size: 100x60 cm
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.00.32
- Ruida Controller: RDC6445
- Windows Version: 10
- Accessories: PC, Chiller 5200, fume purification equipment
Hi,
Fount it for activating the output for "Wind" but not for out1 and out2
Fount it for activating the output for "Wind" but not for out1 and out2