wired plug that has 6 wires attached to the power supply.

Post Reply
Thomas Kirkpatrick
Posts: 2
Joined: Fri Jul 09, 2021
Location: Fort Worth/ Texas / Tarrant
Country: Usa
Nickname: Thomas
Laser Machine Make or Type: XB1060
Laser Power: 100 W
Laser Bed Size: 39 x 24
Home Position: TL
Control Software: RDWORKS
RDWorks Version: ?
Ruida Controller: Other
Windows Version: 7 Win

does anyone know the wiring sequence to the plug that goes into the power supply.
XB 1060 100 watt
Top
User avatar
Gene Uselman
Posts: 2181
Joined: Thu Jul 07, 2016
Location: Suburban Minneapolis, Minnesota, US
Country: USA
Nickname: Gene
Laser Machine Make or Type: QC
Laser Power: 130W
Laser Bed Size: 900x1300
Home Position: TR
Control Software: LIGHTBURN
RDWorks Version: RDw .19 & Lightburn
LightBurn Version: Latest
Ruida Controller: RDC6442
Windows Version: Win 10 Pro
Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.

There are many power supplies used in these machines [probably depending on who is cheapest] and many clones of all those PSs- your best bet is to take pictures of the PS and the terminal boards or to look up the model number on the WWW.
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.


The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Top
Thomas Kirkpatrick
Posts: 2
Joined: Fri Jul 09, 2021
Location: Fort Worth/ Texas / Tarrant
Country: Usa
Nickname: Thomas
Laser Machine Make or Type: XB1060
Laser Power: 100 W
Laser Bed Size: 39 x 24
Home Position: TL
Control Software: RDWORKS
RDWorks Version: ?
Ruida Controller: Other
Windows Version: 7 Win

thank you!
Top
Post Reply

Return to “Tell Us About You”