Hello everyone,
I work for an occupational health and safety management software company and we have just acquired a Chinese laser to identify our padlocks and the equipment for our LOTO Lockout-Tagout software.
We did our first test yesterday and we have much the same problem as this post from Mr. Cyr.
Post title: Y-axis does not move... as soon the laser fires. but is fine before, or after restart
Unfortunately I don't see the solution to this problem ... Please help!
DSP 100W 1060 CO2 Laser Engraver Machine Ruida 6445G Auto Focus XY Linear Guide
Bonjour Hi from Québec Canada
-
Eric Veilleux
- Posts: 1
- Joined: Tue Jul 27, 2021
- Location: St. Jerome
- Country: Canada
- Nickname: Maerix
- Laser Machine Make or Type: CO2 laser
- Laser Power: 100a
- Laser Bed Size: 100cmx60cm
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: 8
- Ruida Controller: RDC6445
- Windows Version: 7
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Eric- that post was actually from sebastien laforet [France I think]- Pete Cyr is our main guy and he had to restore a lot of posts that were deleted a few years ago. He and I were working on Bodor lasers and they were badly engineered and badly converted to a longer tube. We were having problems with the high voltage bleeding into the control circuits and causing havoc. Be very sure your machine is attached to a good ground- a water pipe or similar is best. I drive a 3 foot copper plated rod into the ground and use that personally.
Try that first and if you are still having problems please read the thread in the FAQ about how to ask a question- it will help you help us to answer the question. If you have not, save your Vendor [Machine] files as they are often lost in the early days of trying to solve other problems. Gene
Try that first and if you are still having problems please read the thread in the FAQ about how to ask a question- it will help you help us to answer the question. If you have not, save your Vendor [Machine] files as they are often lost in the early days of trying to solve other problems. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased