HI all!
Thanks for bringing me aboard.
I'm new to lasers. I found a new, unused laser for about half the price, 5hrs away, from a fellow veteran. Couldn't pass it up. 50W Omtech. Bonus money from my job paid for the whole thing. It was just the right time. Very happy with it!
I found Russ online and been paying close attention.
Today, (last night) I got a new meniscus lens and mirrors, dropped and cracked my planar onto the x frame. Just a chip off the edge but glad i had ordered the new one.
Glad I got the mirrors because one would not clean up for bad backing. They sent a 2.5" depth lens while mine is 2".
Because of having researched with Russ, I made lengthening adjustments on the tube, did ramp test and made some cuts anyway. In fact, I cut my first spiral bowl out of 6mm plywood. No kerf checks yet but I thought it was simple enough and it was.
New lens tomorrow maybe. I've only had it almost a month so it's still about finding materials and making notes while watching the masters.
I sew as a tailor, machine embroider and now learning the laser. I love it!
All's well in NJ!
Hello from NJ, USA
-
Carlos Cortez
- Posts: 2
- Joined: Fri Oct 01, 2021
- Location: Mays Landing, New Jersey
- Country: United States
- Nickname: Carlos
- Laser Machine Make or Type: Omtech
- Laser Power: 50W
- Laser Bed Size: 300x500mm
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: 1.0.04
- Ruida Controller: Other
- Windows Version: 10 64bit
- Accessories: Honeycomb table
- Contact:
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Carlos- you seem to have the correct attitude for this hobby- try something and try to remember what the result was. We recommend saving your Vendor files [per the FAQ section] as they can be lost easily. Happy lasering and ask any questions you may have. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Carlos Cortez
- Posts: 2
- Joined: Fri Oct 01, 2021
- Location: Mays Landing, New Jersey
- Country: United States
- Nickname: Carlos
- Laser Machine Make or Type: Omtech
- Laser Power: 50W
- Laser Bed Size: 300x500mm
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: 1.0.04
- Ruida Controller: Other
- Windows Version: 10 64bit
- Accessories: Honeycomb table
- Contact:
Thanks Gene. It's great to see so many possibilities for lasers. So many things cut or crafted with our ingenuity and patience. Keep it clean and focused, read and follow good gurus. Stay aware of simple tricks or instructions from unexpected places. Be safe through it all.
I'm just glad this forum is here. I'm interested in wooden 3d puzzles and toys. Looking for good legit plan libraries w instructions like makecnc.
I'm just glad this forum is here. I'm interested in wooden 3d puzzles and toys. Looking for good legit plan libraries w instructions like makecnc.