Hello, I am here for helping a my friend with his new RDC644XG.
Not reading U-disk files
So, i'm going to search how can i do
A lot of thanks
Hello from Italy
-
Vito Pignataro
- Posts: 4
- Joined: Mon Oct 25, 2021
- Location: Bari
- Country: Italy
- Nickname: Vitordworks
- Laser Machine Make or Type: Rdc644xg
- Laser Power: 80
- Laser Bed Size: 16x30
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01
- Ruida Controller: RDC6445
- Windows Version: Xp
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Vito- are you aware that Udisk files are a different file type [I 'think' .rd if I recall?]. We recommend saving your Vendor files [details in the FAQ section] as these are often lost. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Vito Pignataro
- Posts: 4
- Joined: Mon Oct 25, 2021
- Location: Bari
- Country: Italy
- Nickname: Vitordworks
- Laser Machine Make or Type: Rdc644xg
- Laser Power: 80
- Laser Bed Size: 16x30
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01
- Ruida Controller: RDC6445
- Windows Version: Xp
Hello Gene, tanks for answer.
I saved files .dxf and .dwg
But on rdc644xg the response was ‘no files’
I tryed with various udisks formatted in fat32.
Every time ‘no files’
I saved files .dxf and .dwg
But on rdc644xg the response was ‘no files’
I tryed with various udisks formatted in fat32.
Every time ‘no files’