Hi at all,my name is Giuseppe and i 'm 54 y.o., i'm very happy to bought a Ruida Controller 6445S and installed on my machine. I hope that i will find in this forum all the experiences of other users that help me to use in right way this controller.
Thanks
Hi from South Italy
-
Giuseppe Reda
- Posts: 2
- Joined: Mon Nov 01, 2021
- Location: Telese Terme / BN
- Country: Italy
- Nickname: Excalibur67
- Laser Machine Make or Type: 6040 Chinese
- Laser Power: 100W
- Laser Bed Size: 16"x30"
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: v8.01.54
- Ruida Controller: RDC6445
- Windows Version: 10Pro
-
Gene Uselman
- Posts: 2181
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
Welcome Giuseppe- if you have a new controller you will also need a new parameter file [Vendor file]- the one you are using is incorrect. If you look in the FAQ section there is a lot of info on how to modify a file to suit your machine. Gene
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased