LaserUser.com Forum (formerly RDWorksLab)

Hello

i'm in a retrofit conception with the mecanic of a universal laser M300 i have bought for 100 euros.

The beam window has a collimator the same as link above

https://www.pdi3d.com/UL_VLS_Desktop_Co ... 139-00.htm

can i let it with a 100 w W2 reci laser ? i think yes but not sure

Thank's for help and have a good day

Eric

It could, except the beam has to fit within that window, and it's on the small side. The M300 has a very small beam.

IIRC that collimator is a 1.5x or at most a 2x. The beam has to fit the original diameter on the first lens and the expanded diameter on the second. The second one is the larger concern.