RDC6442S Origin
-
Robert Phippen
- Posts: 2
- Joined: Fri Feb 18, 2022
- Location: Hatton Vale, Qld,
- Country: Australia
- Nickname: Bob
- Laser Machine Make or Type: 130W Laser
- Laser Power: 130
- Laser Bed Size: 1300x1200mm
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: V8.01.19
- Ruida Controller: RDC6442
- Windows Version: 7
Hi. I have recently replaced the Trocen controller on my laser with a RDC6442S unit. Now when cutting and the cutting is finished the laser just stops where it finished cutting. It does not return to the job origin. Is there a setting to correct this ?? I have tried both with RDWorks and Lightburn. Both do the same. In Lightburn i can hit the return to origin button in the software and it returns to the job origin. But that is a step that takes time and effort. Trocen moved automatically to the job origin when it finished cutting
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
RDWorks, Right set of panes, USER tab, OTHER radio button, Return parameter. Home, positioning, or none.