Setting up Rotary in LB
-
Greg Paul
- Posts: 44
- Joined: Mon Dec 20, 2021
- Location: Boerne/Texas
- Country: United States
- Nickname: Greg
- Laser Machine Make or Type: Home made twin head
- Laser Power: 150w/40w
- Laser Bed Size: 63"x36"
- Home Position: BR
- Control Software: RDWORKS
- RDWorks Version: 8.0
- Ruida Controller: RDC6445
- Windows Version: 10
I’m trying to setup chuck rotary on CO2 laser. RDC6445 controller firm ware main board 15.01.22, Lightburn version 1.2.01. Used rotary setup. Chuck is enabled, Rotary enabled. Test will move x axis not y axis. I can move rotary manually in move window. Settings changes have no effect on rotary and using test button will move X axis not Y. Using a manual switch to change from Y to Rotary. If I run program it will turn rotary axis but at Y settings. Thanks