I have just documented myself to make myself a rotary for the engraver.
If I understood correctly, you just have to connect a stepper motor on the Y axis, and adjust on the software.
(of course the chassis and the 2 supports which must turn in the same direction, but everyone is free to create their own system ^^)
This seems too simple to me, is there anything else to do ?
(controller / circuit / ... ???)
Create a rotary tool
-
Edouard Connor
- Posts: 23
- Joined: Thu Aug 25, 2022
- Location: paris
- Country: france
- Laser Machine Make or Type: chinese 80w / chinese 40w
- Laser Power: 80w
- Laser Bed Size: 19 x 27
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: 8.01.28
- Ruida Controller: RDC6442
- Windows Version: windows 10
-
Gene Uselman
- Posts: 2180
- Joined: Thu Jul 07, 2016
- Location: Suburban Minneapolis, Minnesota, US
- Country: USA
- Nickname: Gene
- Laser Machine Make or Type: QC
- Laser Power: 130W
- Laser Bed Size: 900x1300
- Home Position: TR
- Control Software: LIGHTBURN
- RDWorks Version: RDw .19 & Lightburn
- LightBurn Version: Latest
- Ruida Controller: RDC6442
- Windows Version: Win 10 Pro
- Accessories: I have a combining lenses, pin tables [homebuilt], honeycomb tables , wireless remote, Modifed Ultimate Air Assist, home built non-powered rotary device, PrusaMK4 and Mini Prusa printers.
You strike me as someone who enjoys building? I have built several rotaries and have developed plans and instructions... I used one that Russ built from acrylic as my starting point and redesigned it with 2020 extrusions and leadscrews. PM me your email and I will send it to you [no stepper or cable to the controller needed].
viewtopic.php?f=114&t=5028&p=26874&hili ... ary#p26874
viewtopic.php?f=114&t=5028&p=26874&hili ... ary#p26874
If the Help and advice you received here was of VALUE...
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
Please consider making a donation to maintain the RDWORKSLAB Forum.
The days that I keep my gratitude higher than
my expectations, Well, I have really good days.
Ray Wylie Hubbard- unfortunately deceased
-
Edouard Connor
- Posts: 23
- Joined: Thu Aug 25, 2022
- Location: paris
- Country: france
- Laser Machine Make or Type: chinese 80w / chinese 40w
- Laser Power: 80w
- Laser Bed Size: 19 x 27
- Home Position: TL
- Control Software: RDWORKS
- RDWorks Version: 8.01.28
- Ruida Controller: RDC6442
- Windows Version: windows 10
Yes I like to build ^^ you have to have fun too ^^