644x controler led#9 Stays on
-
Harry Beeman
- Posts: 2
- Joined: Fri Jan 07, 2022
- Location: Phoenix,Az
- Country: United States
- Laser Machine Make or Type: china blue
- Laser Power: 50 watts
- Laser Bed Size: 8x12
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6445
- Windows Version: 10
My laser led #9 Water Proctection stays lit any help appreciated can't send files to controller via usb cable.
-
Dave Vigness
- Posts: 526
- Joined: Sun Dec 15, 2019
- Location: Kansas City - Rural
- Country: USA
- Nickname: Dave
- Laser Machine Make or Type: Chine Red and Black
- Laser Power: EF RF2 80W
- Laser Bed Size: 20 x 26
- Home Position: TR
- Control Software: RDWORKS
- RDWorks Version: 8.01.54
- Ruida Controller: RDC6445
- Windows Version: 7
- Accessories: Power Switch for air assist / exhaust blower, Ma meter with switch for external digital, dual digital temp gauge, LED lights under gantry and and and.
Pics and a list here. https://drive.google.com/drive/folders/ ... sp=sharing
Is your WP switch connected to the controller or the PSU? If you have it connected to the PSU, go into the controller and tell it to ignore the WP inputs.
-
Harry Beeman
- Posts: 2
- Joined: Fri Jan 07, 2022
- Location: Phoenix,Az
- Country: United States
- Laser Machine Make or Type: china blue
- Laser Power: 50 watts
- Laser Bed Size: 8x12
- Home Position: TL
- Control Software: LIGHTBURN
- RDWorks Version: v8.01.18
- Ruida Controller: RDC6445
- Windows Version: 10
p/s thanks Dave